Brocade Network OS Message Reference v4.1.1 - Manual (Page 172)

156 Network OS Message Reference
53-1003227-01
EM-1020
8
EM-1020
Message
A problem was found on one or both CID cards (
only.>), run the CIDrecov tool to get more information and recovery options.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a problem was found either accessing one (or both) of the CID cards or with the content of
the data stored there. The content problem could be a corrupted data set or a mismatch between the two
CID cards.
Recommended
Action
Execute the CIDrecov command to get details of the problems found and how to recover.
EM-1021
Message
A CID card has been inserted, a CID verification audit will be run to detect any
mismatches or other problems.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the second CID card was enabled. Because the data may not match, the CID verification
audit will be run.
Recommended
Action
If an EM-1020 follows, execute the CIDrecov command to get details of the problems found and how to
recover. If not, no action is required.
EM-1022
Message
A CID card access problem has been encountered, please run the CIDrecov tool to
get more information and recovery options.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a problem was encountered while accessing one (or both) of the 2 CID cards or with the
content of the data stored there.
Recommended
Action
Execute the CIDrecov command to get details of the problems found and how to recover.