beautypg.com

Sec-1185, Sec-1187, Sec-1189 – Brocade Network OS Message Reference v4.1.1 User Manual

Page 383

background image

Network OS Message Reference

367

53-1003227-01

SEC-1185

8

SEC-1185

Message

switch DB.

Message Type

LOG

Severity

INFO

Probable Cause

Indicates that the switch database was enabled or disabled as the secondary authentication,
authorization, and accounting (AAA) mechanism when the remote authentication dial-in user service
(RADIUS) or Lightweight Directory Access Protocol (LDAP) is the primary AAA mechanism.

Recommended

Action

No action is required.

SEC-1187

Message

Security violation: Unauthorized switch tries to join fabric.

Message Type

LOG

Severity

INFO

Probable Cause

Indicates that a switch connection control (SCC) security violation was reported. The specified
unauthorized switch attempts to join the fabric.

Recommended

Action

Check the switch connection control policy (SCC) policy to verify the switches are allowed in the fabric. If
the switch should be allowed in the fabric but it is not included in the SCC policy, add the switch to the
policy using the secpolicy defined-policy scc_policy member-entry command. If the switch is not
allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to
access your fabric. Take appropriate action as defined by your enterprise security policy.

SEC-1189

Message

Security violation: Unauthorized host with IP address tries to do

SNMP write operation.

Message Type

LOG

Severity

INFO

Probable Cause

Indicates that a Simple Network Management Protocol (SNMP) security violation was reported. The
specified unauthorized host attempted to perform an SNMP write operation.

Recommended

Action

Check the WSNMP policy (read/write SNMP policy) and verify which hosts are allowed access to the
fabric through SNMP. If the host is allowed access to the fabric but is not included in the policy, add the
host to the policy. If the host is not allowed access to the fabric, this is a valid violation message and an
unauthorized entity is trying to access your fabric. Take appropriate action as defined by your enterprise
security policy.