Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 91)

Custom Capture Data Project Catalyst Enterprises, Inc.
77
Programming the Sequencer as Text
Figure 69 Prototype Text Programming Window
The text programming window opens with three default prototype states with all
programmable parameters displayed in blue.
Additional States You may add up to 30 additional states by clicking the Add State button.
Programmable parameters are displayed as blue.
Maximize Display You may maximize the programming window by clicking the Full Screen
button.
To Change Parameters
1. Position the display cursor over the parameter and double click the left mouse
button to open a list box with available choices for that parameter. See Figure
70.
2. Choose the desired parameter with the display cursor and double click the left
mouse button.
To Delete a Parameter Double click the parameter to be deleted and select delete.
Add Else If You may include Else If statements in your program by clicking the Add
Else If button. To remove the added Else If, double click on it and choose
from the open list box.
Tag and Discard Tag and Discard allows the user to delete a portion of the capture memory.
Setting Tag places a marker in capture memory and setting Discard causes
the deletion of all captured data between Tag and Discard.
Click the ellipses after If [Event_A occurs] ”...” and choose Tag_Event at
the point after which you expect a result. Then click the ellipses after
ElseIf [Event_B occurs] ”...” in the state where you expect the result and
choose Discard. Data will be discarded between the last Tag_Event set
and the Discard set.