Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 50)

Catalyst Enterprises, Inc. Easy Mode
36
Trace Statistics
PCI-X not supported in current version.
Trace Statistics analysis is implemented by capturing data in memory and then post
processing it with software. The analysis software is capable of measuring important
parameters such as Minimum and Maximum latency occurrences for any target or user
defined specific target, command utilization such as how many times an I/O write
versus I/O read occurs or, how many times memory commands occur. Available Trace
Analysis parameters that may be selected for a report are listed on page 39.
Obtaining Trace Statistics
Figure 24 Trigger Point Selection
1. Select a Trigger Point from the Trigger On dropdown list and then select the
Trace Statistics tab to set the trace statistics options. For a list of available
choices see Trace Analysis Options on page 39.
Click the Trace Statistics Icon on the menu bar to open the Trace Statistics
dialog box