Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 30)

Catalyst Enterprises, Inc. Configuration Menu
16
Configuration Menu
Working Mode Allows you to select the analyzer configuration. The choices are: PCI
State Analyzer, PCI Timing Analyzer, PCI Analyzer/Exerciser, PCI
Async Timing Analyzer, PCI-X State Analyzer and PCI-X Analyzer/
Exerciser.
Protocol Errors Used to configure a Protocol Errors mask for use in triggering on protocol
errors. See Protocol Errors on page 155.
Mnemonics Used to define Mnemonics. Mnemonics may be used to display user
assigned names to specific patterns, in search a pattern in the display or
filter data patterns from a display. See Mnemonics on page 164.
External Signal Names Allows you to assign specific names to external signals for display
purposes only. “External Signals” on page 166
External Signal/Trigger Settings Allows you to configure external input and output triggers. See
“External Signals” on page 166.
Voltage Check Used to select or deselect the voltages to be monitored for tolerance
compliance. See “Enabling Voltage Check” on page 17. Not available for
TA700P (PMC).
Host Bus Used to force the software to work with different bus characteristics than
the ones detected by the TA700/800.
Zoom Options Used to select zoom about X or Y cursor or between X and Y cursor or
Zoom Around when displaying a Wave data capture window. See Using
Zoom in the Wave Window on page 139
Color Setting Used to set custom color combinations for the Analyzer Performance
Analysis Window.
Software Settings Used to set global software user preferences. “Global Software Settings”
on page 21.
Authorization Enables purchased system configurations. See “Authorization” on
page 22
System Feature Status Displays enabled system features. See “System Feature Status” on
page 23
Configuration Space Information Displays the PCI characterization of the TA700/800 that is
presented to the System BIOS.
Click Configuration on the main menu bar to display the various configuration
options.