Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 54)

Catalyst Enterprises, Inc. Easy Mode
40
Exercise and Capture
Make sure that the TA700/800 is in the State Analyzer & Exerciser configuration
and is operating in the Easy Mode as shown on the Main Menu bar below.
Figure 28 Capture Data and Trigger Dialog Box
The data capture and trigger operation behaves identically to that as in the State
Analyzer Only configuration, with the exception, that the bus signals are generated by
an exerciser program that you define.
For details of setting up a capture see “Instant Data Capture & Trigger” on page 26.
Click the Green button on the Main Menu bar to open the Capture Data and
Trigger dialog box shown in Figure 28.