Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 130)

Catalyst Enterprises, Inc. Compliance Device Test
116
Compliance Device Test
The TA700/800 incorporates a built in “Compliance Device Test” that performs the
PCI compliance checklist. The Compliance Device Test is available only while
operating in the Analyzer & Exerciser configuration.
To view a comprehensive description of the PCI Compliance Checklist, click
Compliance on the menu bar and then select View check list which opens the
checklist as a Microsoft Word for 2.1 spec and Acrobat format for 2.2 spec that you
may review on line or print.
NOTE 1: To view the Compliance checklist version 2.1 specifications requires Microsoft
Word 97 or higher to be installed on your system.
NOTE 2: To view the Compliance checklist version 2.2 requires Acrobat 4.0 or higher reader
to be installed on your system.
NOTE 3: You can run the tests at an offset that is specified in the compliance.inf file. For
more information refer to Manual\Compliance-Readme.txt.
Disable Device Drivers When performing a device compliance test on your device that has
resident device drivers, you must disable them for the duration of the test
to avoid hanging the system. This is due to the compliance test rewriting
of the DUT registers for the purposes of the test.