Status led function description, Jumper configuration, Tatus – Teledyne LeCroy TA700_800_850 User Manual User Manual

Page 254: Led f, Unction, Escription, Umper, Onfiguration

Catalyst Enterprises Inc.

APPENDIX D

240

Status LED Function Description

D3, D11

When illuminated, the TA700PDC has been configured.

Jumper Configuration

TA700P +3.3V Power Source selection

TA700P +5V Power Source Selection

Connecting an External Power Supply

TA700 Power Up configuration

Note:

The TA700P operating as a PCI agent requires 256 I/O space and 4 Meg of memory
from the host system.

Trigger Out

JP2

Shunt 1-2 center to right

+3.3V External Power

Shunt 2-3 center to left

+3.3V Bus Power (Default)

JP3

Shunt 1-2 center to right

+5V External Power

Shunt 2-3 center to left

+5V Bus Power (Default)

JP1

JP1.1 Left pin

+3.3VEX

JP1.2 Center pin

+5VEX

JP1.3 Right pin

GND

JP17

Open

TA700P Declared as PCI agent (Default)

Closed

TA700P Transparent to the System BIOS