Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 261)

APPENDIX F Catalyst Enterprises, Inc.
247
APPENDIX F
TA850 PCI Card
Figure 164 shows a TA850 PCI Analyzer card identifying status LED locations,
external signal, external trigger input and output connections and external power
jumper location.
Figure 164 TA850 PCI Analyzer Card
Status LED Function Description
SYS (Red/Green LED) When green it indicates that the system voltages are within 5% of their
nominal values. If any of +5V, +3.3V +3.3V
aux
, +3.3V
io
or +12V drop by
more than 5%, the SYS LED turns red. Upon power on it comes up red
during a power self test and turns green when the software executes
TRIG Indicates that the analyzer has met the trigger condition and is awaiting
for the post-trigger data to be captured.
D1, D2 When both are illuminated, the TA850 FPGAs are properly configured.
S1 is accessible on the back of the board
J7 Trigger Out
J7 GND
JP10
JP2
Status LEDs
JX1
Ethernet J2
Ethernet LED
D6
USB JR2
JP1
JP6