Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 154)

Catalyst Enterprises, Inc. Display Manipulation
140
Zoom Options
To zoom about the X, Y or between the X & Y cursors click Configuration on the
main menu bar and select the Zoom Options as shown in Figure 129.
Figure 129 Setting Zoom Options
Zoom Around Choosing this option zooms the current display window independently of
the cursors.
User Defined Display Configuration
Users may modify the display by adding, removing, and rearranging the position and
color of the signals as it fits best for their application. This format may be saved and
recalled for different data capture and trigger projects.
Display Configuration To save and recall this configuration file, simply make all the desired
changes to the display and do a “Save As”, select a file name with
extension.ddc (Data Display configuration).
To recall this configuration format click on “Data Display Configuration” Button on
the bottom of the project menu before executing the project, browse and select the file
name desired for this project and enable it in the drop down menu.
Note: Saving the Data display configuration does not work on the pre-captured data
provided with the software in the simulation mode, it has to be done on user
captured data.