Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 65)

Easy Mode Catalyst Enterprises, Inc.
51
Read/Modify Write
Figure 41 Read/Modify Write Dialog Box
1. Enter an address the contents of which you wish to modify in the Current
Address edit box.
2. Enter the value to be written to that address in the New Value edit box.
NOTE: This feature assigns the TA700/800 to be a bus master and may be used to read or
write to any register or memory address of a target device without having to use a
programming menu.
To perform read/modify write select Read/Modify Write . . . from the Exerciser
dropdown list on the menu bar. This will open the Read/Modify Write dialog
box.