Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 116)

Catalyst Enterprises, Inc. TA700/TA800 as Target
102
Predefining Data To load the memory with user predefined data, check the Define Local
Memory Contents check box and then the Data Block button.
Define the desired data blocks as described in “Creating a Data Block
File” on page 44. When defining data please note that data is to be entered
such that the MSD is in the highest address byte complying with the local
memory organization format shown in Figure 95.
Dump Memory
You may view the local memory contents after a local memory operation. To view the
local memory content, specify the start address and the end address that you wish to
view and click the Dump button.
Figure 96 Local Memory Content