Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 158)

Catalyst Enterprises, Inc. Display Manipulation
144
Search Using Mnemonic To search for a match pattern defined as a Mnemonic click in the Name
Field of the search pattern dialog and choose the mnemonic name that you
wish to use in the search.
Figure 134 Choosing a Mnemonic
Defining Mnemonics For instructions on how to define Mnemonics see “Mnemonics” on
page 164.
Virtual Address Pattern To search for a Virtual Address pattern, click the Virtual Address check
box in the Search Also area and enter the address relative to the start
address of a Burst or DMA transfer (Which is transferred on the bus) to
locate the corresponding data point. Virtual addresses are displayed in
black in the results display.
Termination To search for a termination, click the down arrow next to the Termination
drop-down list box and choose the desired termination type to search for.
Figure 135 Search for Virtual Address and Termination Selection
Required Data The search forward or search backward functions require collected data in
the selected search direction in order to operate. A search is performed in
relation to the X cursor. When a match is found a new Search S cursor
appears at that location.
After the initial search, you may perform forward or backward searches for the
same item by clicking on the Find Next or Find Previous buttons on the menu
bar.