Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 259)

APPENDIX E Catalyst Enterprises, Inc.
245
TA800 Power Up configuration
Note 1. Jumper is used on TA800 Rev. A boards only. Rev. B boards perform this function
with switch S1.1.
Note 2. Switch S1.2 on Rev, B boards is for internal use only.
Note 3. The TA800 operating as a PCI agent requires 256 I/O space and 4 Meg of memory
from the host system.
External Inputs JP10 (Supported on TA800 Rev. B only)
S1 Jumper Bottom two
Open TA800 Declared as a PCI agent (Default)
Installed (See note 1.) TA800 is transparent to the System BIOS
Switch S1.1
OFF TA800 Declared as a PCI agent (Default)
ON TA800 is transparent to the System BIOS
Color Signal Pin Pin Signal Color
Brown Ext_In0 1 2 GND Red
Orange - 3 4 - Yellow
Green GND 5 6 - Blue
Magenta - 7 8 GND Gray
White - 9 10 - Black
Brown GND 11 12 - Red
Orange - 13 14 GND Yellow
Green - 15 16 - Blue
Magenta GND 17 18 - Gray
White - 19 20 GND Black
Brown - 21 22 - Red
Orange KEY 23 24 - Yellow