Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 55)

Easy Mode Catalyst Enterprises, Inc.
41
Defining an Exerciser Program
1. Click on the Exerciser Program tab to open the Exerciser Program definition
dialog box as shown in “Exerciser Program Definition Dialog Box” on page 41.
Figure 29 Exerciser Program Definition Dialog Box
2. Define up to 9 exerciser program lines by selecting a command type, data to be
written or a previously defined data block if applicable, target address, and data
size.
3. Set the exerciser options as described on page 42.
4. Click Run to perform data capture and trigger with exerciser generated signals.
Figure 30 Wave File Output