Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 21)

Installing Your Analyzer Catalyst Enterprises, Inc.
7
• Using Browse go to:
“c:\Program Files\Catalyst\TA700_800\Predefined\USB Driver”
(Operating under Windows 2000 or Windows XP you need to enter
the ‘Win2k’ directory.)
6. Click Next and then Finish to complete the TA700/800 USB port driver
installation.
Manually Updating the TA700/800 USB Driver
1. Install the new TA700/800 software as described in the software installation
section.
2. Click Start: Settings: Control Panel: System and click the Device Manager tab.
3. Find the Catalyst Test Tools entry.
4. Select and right click the Catalyst TA700/800 board.
Note: If the TA700/800 board is not present, please connect the TA700/800 to the host
computer using the USB cable.
5. Select Properties and click the drivers tab.
6. Click “Update Driver”
7. Choose the “Specific location” option button and deselect all other option
buttons.
• Using Browse go to:
“c:\Program Files\Catalyst\TA700_800\Predefined\USB Driver”
(Operating under Windows 2000 or Windows XP you need to enter
the ‘Win2k’ directory.)
• Click OK.
8. Click Next and then Finish to complete the USB driver update.