Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 215)

Library Exported Interfaces Catalyst Enterprises, Inc.
201
SetElseStatementStr(nStateNo,nElseNo,nFieldIndex,strExpression)
Parameters
nStateNo Specifies the state No whose data is to be retrieved. Range between 0-
31.
nElseNo Specifies the Else No whose data is to be updated. Ranged between 0-
10.
nFieldIndex Specifies the index of state Part that whose data is to be retrieved.
strExpression Specifies the value of specified part of sequencer state.
GetElseStatementStr(nStateNo, nElseNo, nFieldIndex, strExpression)
Parameters
nStateNo Specifies the state No whose data is to be returned. Ranged between
0-31.
nElseNo Specifies the Else No whose data is to be updated.Ranged between 0-
10.
nFieldIndex Specifies the index of state Part that whose data is to be returned.
strExpression Specifies the current value of specified part of sequencer state.
Remarks The GetElseStatementStr method gets specified part of sequencer
belonging to strExpression parameter.
SetTimingEnableValue(nTimingEnableValue)
Parameters
nTimingEnableValue Specifies the Value of Enable parameter for next run. The scale of
This parameter is nanosecond, and with .1 nanosecond tolerance.
GetTimingEnableValue(pnTimingEnableValue)
Parameters
pnTimingEnableValue The Value of Enable parameter returned.
SetTimingTClockValue(nTimingTClkValue)
Parameters
nTimingTClkValue Specifies the Value of T-Clk parameter for next run. The scale of This
parameter is nanosecond, and with .1 nanosecond tolerance.
GetTimingTClockValue(pnTimingTClkValue)
Parameters
pnTimingTClkValue Value of T-Clk parameter returned.