NEC ExpressA1160 - Manual (Page 79)

Cell remote console interface
3-37
operating system cannot be running when you submit partitioning actions.
Refer to Section 8 Performing Partitioning Actions for procedures to perform partitioning
tasks.
3.6.3. Cell Access
Figure 3-26 shows the partition Service Processor cell access page.
Figure 3-26 Cell Access Page
You can access the remote console interface for an individual cell by clicking the
appropriate cell name on the cell access page and logging on, as usual. This method is
useful for doing maintenance and relieves you of the necessity of remembering MLAN
addresses for cells. Refer to
2.1.2 Accessing and Logging On to remote console
interfaces for more information.
3.7. Cell remote console interface
A cell remote console interface is a set of Web pages for monitoring and managing a cell.
Each cell has its own set of Web pages. You must log on to each cell remote console
interface separately (refer to
2.1.2 Accessing and Logging On to remote console
interfaces ).
The top banner of all cell pages displays the
• System name, followed by parenthetical text showing the number of cells in the
system, if the number of cells is greater than one