NEC ExpressA1160 - Manual (Page 48)

Partition Remote Console Interface
3-6
Critical A problem exists that requires immediate
attention. Partition function can be affected.
Non-recoverable A problem exists that management firmware
cannot recover. Partition function is affected.
Unknown Management firmware cannot determine the
health of the partition.
• State
Operating state of the partition, as set by user actions or determined by
management firmware. Values can be
Value Description Icon
Stopped The partition is stopped.
Initializing, Starting,
Cell check-in, BIOS
starting, OS load The partition is starting.
Running The partition is running.
Hard reset initiated,
Power down
initiated The partition is being rebooted or powering
down
Unknown The partition state cannot be determined.
• Name (cell)
The name of each cell in the partition, which is established by management
firmware at startup and depends on the cell and cable configuration.
• Power (cell)
The power status of each cell in the partition, as set by user actions or determined
by management firmware. Values can be
Value Description Icon
On The cell is powered on.
Powering on The cell is powering on.
Off The cell is powered off.