NEC ExpressA1160 - Manual (Page 148)

Configuring Alerts using Server Management Software
7-14
b. Under Other tab, select the desired settings, such as shutdown delay, enter
values in the subsequent window, and click ok.
c. Click close to save the settings and close the Base Setting window.
3. Click Destination ID Setting on the Report Setting window, and press Enter.
The Destination ID Setting window appears, in which you specify destinations for
alert notifications.
a. To add a new ID, click Add..., enter the desired data in the ID Setting window,
and click close.
b. To modify an existing ID, select an ID, click Modify..., enter the desired data in
the ID Setting window, and click close.
c. To delete an ID, select an ID, click Delete..., and click close.
d. Add, modify, or delete groups in the Group Setting dialog box, as desired.
e. Click close to save the settings and close the Destination ID Setting window.
4. Click Agents Events Setting on the Report Setting window, and press Enter.
The Agents Events Setting window appears, in which you specify which events to
monitor and associate events with report destinations.
a. Set Operation on source to ON to set the report destination simultaneously for
all event IDs of the selected source, or set it to OFF to set the report
destinations individually or when modifying settings.
b. Click Set... to change settings, enter the desired data in the Monitor Event
Setting window, and click ok.
c. Click close to save the settings and close the Agents Events Setting window.
5. Click Syslog Events Setting on the Report Setting window, and press Enter.
The Syslog Events Setting window appears, in which you specify which syslog
events to monitor and associate events with report destinations.
a. Set
Operation on source
to ON to set the report destination simultaneously for
all event IDs of the selected source or when adding or deleting the source of
the syslog monitoring events, or set it to OFF to set the report destinations
individually or when adding or deleting the monitor event or modifying settings.
b. Click Add... to add the source of the syslog monitoring events, enter the
desired data in the Add Syslog Item window, and click ok.
c. Click Del... to delete the selected source of the syslog monitoring events (ON)
or the selected syslog monitoring event (OFF), and click ok.
d. Click Set... to specify the report destination of the selected source, enter the
desired data in the Syslog Application Setting window, and click ok.
e. Click close to save the settings and close the Syslog Events Setting window.