Remote console interfaces, Page layout – NEC ExpressA1160 User Manual
Page 43
3-1
Section 3
Remote console interfaces
This section describes management firmware and its remote console interfaces.
Management firmware is a comprehensive means of configuring, controlling, and
monitoring individual components of the Express5800/A1160 system and the system as
a whole. Management firmware is an implementation of IPMI—Intelligent Platform
Management Interface Specification Second Generation v2.0.
Different remote console interfaces control each of the following components:
• Partitions
The remote console interface for a partition is described in
3.5 Partition Remote
Console Interface
.
• System
The remote console interface for the system as a whole is described in
3.6 System
remote console interface
.
• Cells
The remote console interface for a cell is described in
3.7 Cell remote console
interface
.
Each remote console interface is a set of Web pages. Each page displays information
about some aspect of the component and contains commands to configure or use it.
Refer to
3.1 Page Layout
through
3.4 Navigation
for general information that applies to
all Web pages.
Refer to
2.1 Remote console interfaces
for uses of the remote console interfaces and
instructions for logging on to each remote console interface.
3.1. Page
Layout
All pages in the remote console interface have the same layout, as shown in
Figure 3-1
.