NEC ExpressA1160 - Manual (Page 64)

Partition Remote Console Interface
3-22
Solutions Console.
3.5.13. Customer Data Settings
Customer data is not supported.
3.5.14. Alert Management
An alert is a notification that an event occurred that requires attention. An event (refer to
3.5.5 Event Log ) is a condition that is detected (for example, by a sensor) and reported
to a monitoring entity. The condition can be a system error, a change in an
environmental condition, a system resource that is outside currently accepted limits, or
some other system status that is no longer within specification.
Figure 3-13 shows the partition alert management page.
Figure 3-13 Alert Management Page
Management firmware generates alerts when certain events occur in a partition. Alerts
can be
• E-mail messages
If you configure e-mail alerts, you must configure the Simple Mail Transfer Protocol
(SMTP) server.
• SNMP traps