NEC ExpressA1160 - Manual (Page 62)

Partition Remote Console Interface
3-20
• Hot available sockets
This value is the number of processor sockets that are currently available in the
partition.
• Enable wrapping of Event Log
Select the check box if you want the event log to overwrite the earliest entries when
the file reaches its maximum size. If you do not select the check box, the system
cannot log any more events when the log is full.
3.5.12. Fault Settings
Fault settings enable you to define certain management firmware behavior when
problems occur.
Figure 3-12 shows the partition fault settings page.
Figure 3-12 Fault Settings Page
The following fault groups and behavior settings are available:
• Start Degraded Partition
A degraded partition is missing some resources, such as a cell that has not been
discovered or is not usable. Select one of the following options:
- Permit a degraded partition to start
This setting means that the partition might not have all the possible resources