NEC ExpressA1160 - Manual (Page 110)

Viewing and Temporarily Changing BIOS Boot Order
5-4
•
Select the highlighted entry and execute it or display the next window.
• F9
Reset the selected entry to the default value.
• F10
Save all changes on the window.
• Esc
Discard all changes on the window without saving them.
• Tab
Select the next consecutive entry.
• Spacebar, +/- keys
Select a displayed value on some screens, such as changing Disable to Enable.
To execute a control, press the designated key on the keyboard.
The controls that are available on each window vary. Be sure that you are aware of
which controls are available before pressing any keys.
5.6. Viewing and Temporarily Changing BIOS Boot Order
You can view the boot order during the boot process and, if desired, change it for this
boot only, as follows:
1. Interrupt the boot process to enter the BIOS interface (refer to 2.7.2 Accessing
BIOS Interface ).
The BIOS front page appears, as shown in Figure 5-1 .