Hardware locator – NEC ExpressA1160 User Manual

Page 55

Text mode
Original mode

Partition Remote Console Interface

3-13

Log

for more information.

3.5.6. Hardware Locator

The hardware locator enables you to locate physical cells for maintenance or
troubleshooting activities by causing both the EXPRESSSCOPE® Monitor LCD on the
front of a cell and the LED on the back to flash. If you are logged on to the remote
console interface for a partition, the EXPRESSSCOPE® Monitor LCD and LED flash on
all cells in the partition.

Figure 3-6

shows the partition hardware locator page.

Figure 3-6 Partition Hardware Locator Page

To turn on the hardware locator for all cells in the partition

1. Select one of the following values from the list:

• Off

Turns off the EXPRESSSCOPE® Monitor LCD and LED lights

• On for 4 minutes

Causes the EXPRESSSCOPE® Monitor LCD and LED lights to flash for four
minutes

• On

Causes the EXPRESSSCOPE® Monitor LCD and LED lights to flash