HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem Instruction Manuals and User Guides
We have 34 Instruction Manuals and User Guides for Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 205 |
| Size: | 1.47 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- activity
- all
- auto-deployment
- banner
- cli
- config
- configbackup
- connection-map
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp-group
- igmp
- interconnect-mac-table
- interconnect
- iscsi-boot-param
- iscsi-connection
- lacp-timer
- ldap-certificate
- ldap-group
- ldap
- link-dist-interval
- lldp
- local-users
- log-target
- loop-protect
- mac-cache
- mcast-filter-rule
- mcast-filter-set
- mcast-filter
- mfs-filter
- nag-network
- name-server
- network-access-group
- network-range
- network
- port-monitor
- port-protect
- profile
- qos-class
- qos-classifier
- qos-map
- qos
- radius-group
- radius
- role
- server-port-map-range
- server-port-map
- server-port
- server
- serverid
- session
- sflow
- sflow-module
- sflow-ports
- sflow-receiver
- snmp-access
- snmp-trap
- snmp
- ssh
- ssl-certificate
- ssl-csr
- ssl
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user-security
- user
- vcm
- version
- User roles
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Importing an enclosure
- Setting the domain name
- Configuring LDAP authentication support for users
- Configuring RADIUS authentication support for users
- Configuring TACACS+ authentication support for users
- Configuring role-based authentication settings
- Configuring local users
- Configuring local users
- Configuring the LACP Timer
- Obtaining and using a new signed certificate
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Configuring pause flood protection settings
- Hiding unused FlexNICs in a profile
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 290 |
| Size: | 14.83 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 4.01 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Minimum requirements
- LDAP Server Settings (LDAP Server) screen
- LDAP Server Settings (LDAP Groups) screen
- LDAP Server Settings (LDAP Certificate) screen
- RADIUS Settings (RADIUS Server) screen
- RADIUS Settings (RADIUS Groups) screen
- TACACS+ Settings screen
- Role Management (Role Authentication Order) screen
- Role Management (Role Operations) screen
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Network Access Groups screen
- Define Network Access Group screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Quality of Service
- IGMP Settings (IGMP Configuration) screen
- IGMP Settings (Multicast Filter Set) screen
- Define Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Creating FCoE HBA connections for a BL890c i4
- Limited Ethernet connections when using HP Virtual Connect Flex-10/10D modules
- Creating iSCSI connections
- Flex-10 iSCSI connections
- Define Server Profile screen (multiple enclosures)
- Multiple network connections for a server port
- Defining server VLAN mappings
- Fibre Channel boot parameters
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Define Server Profile screen
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Throughput Statistics screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Ethernet Bay Summary (General Information) screen
- Ethernet Bay Summary (Uplink Port Information) screen
- Ethernet Bay Summary (Server Port Information) screen
- Ethernet Bay Summary (MAC Address Table) screen
- Ethernet Bay Summary (IGMP Multicast Groups) screen
- Ethernet Bay Summary (Name Server) screen
- Ethernet Port Detailed Statistics screen
- FC Port Detailed Statistics screen
- FC Bay Summary screen
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10, HP Virtual Connect FlexFabric, or HP Virtual Connect Flex-10/10D module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Appendix: Using Virtual Connect with nPartitions
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 169 |
| Size: | 9.25 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 2.30 User Guide
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures)
- Domain Settings (Backup/Restore) screen
- Domain Settings (Firmware Management) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Edit Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define New Shared Uplink Set screen
- Storage management
- Server management
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Administrative module removal
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 106 |
| Size: | 905 KB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface Version 3.01 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- firmware
- igmp
- interconnect
- ldap
- ldap-certificate
- ldap-group
- log-target
- mac-cache
- network
- port-monitor
- profile
- server
- serverid
- server-port
- server-port-map
- snmp
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- status
- supportinfo
- systemlog
- uplinkport
- uplinkset
- user
- user-security
- vcm
- version
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Network setup
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number (logical) settings
- Server profile overview
- Logging out of the CLI
- Common management operations
- Resetting the Virtual Connect Manager
- Basic configuration
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 21 |
| Size: | 490 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 966 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 317 |
| Size: | 11.66 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 4.20 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Minimum requirements
- LDAP Server Settings (LDAP Server) screen
- LDAP Server Settings (LDAP Groups) screen
- LDAP Server Settings (LDAP Certificate) screen
- RADIUS Settings (RADIUS Server) screen
- RADIUS Settings (RADIUS Groups) screen
- TACACS+ Settings screen
- Role Management (Role Authentication Order) screen
- Role Management (Role Operations) screen
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Network Access Groups screen
- Define Network Access Group screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Networks (Advanced Settings)
- Quality of Service
- sFlow Settings (General) screen
- sFlow Settings (Ports) screen
- IGMP Settings (IGMP Configuration) screen
- IGMP Settings (Multicast Filter Set) screen
- Define Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Creating FCoE HBA connections for a BL890c i4
- Limited Ethernet connections when using HP Virtual Connect Flex-10/10D modules
- Creating iSCSI connections
- iSCSI HBA connections screen
- Define Server Profile screen (multiple enclosures)
- Multiple network connections for a server port
- Defining server VLAN mappings
- Fibre Channel boot parameters
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Define Server Profile screen
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Throughput Statistics screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Ethernet Bay Summary (General Information) screen
- Ethernet Bay Summary (Uplink Port Information) screen
- Ethernet Bay Summary (Server Port Information) screen
- Interconnect Bay Summary (Details) Enet
- Ethernet Bay Summary (MAC Address Table) screen
- Ethernet Bay Summary (IGMP Multicast Groups) screen
- Ethernet Bay Summary (Name Server) screen
- Interconnect Bay Summary (FIP Snooping) Enet
- Ethernet Port Detailed Statistics screen
- FC Port Detailed Statistics screen
- FC Bay Summary screen
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10, HP Virtual Connect FlexFabric, or HP Virtual Connect Flex-10/10D module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Appendix A: Using Virtual Connect with nPartitions
- Appendix B: Auto-deployment process
- Overview of the auto deployment process
- Importing the enclosure into the domain
- Starting a deployment operation
- Viewing deployment information, status, and logs
- Manual TFTP settings
- Stopping a deployment operation
- Subsequent deployments (redeployment scenarios)
- VC GUI auto-deployment status and settings
- Deployment wait and retry states
- Configuring file restrictions
- TFTP logging and enablement
- Appendix C: Using IPv6 with Virtual Connect
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 262 |
| Size: | 17.27 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Versions 3.70/3.75 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Throughput Statistics screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Ethernet Bay Summary (General Information) screen
- Ethernet Bay Summary (Uplink Port Information) screen
- Ethernet Bay Summary (Server Port Information) screen
- Ethernet Bay Summary (MAC Address Table) screen
- Ethernet Bay Summary (IGMP Multicast Groups) screen
- Ethernet Bay Summary (Name Server) screen
- Ethernet Port Detailed Statistics screen
- FC Port Detailed Statistics screen
- FC Bay Summary screen
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10 module or HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Appendix: Using Virtual Connect with nPartitions
- Acronyms and abbreviations
- Glossary
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 172 |
| Size: | 1.35 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.70/3.75 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- version
- activity
- banner
- config
- configbackup
- connection-map
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- igmp-group
- interconnect
- interconnect-mac-table
- iscsi-boot-param
- iscsi-connection
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- lldp
- local-users
- log-target
- loop-protect
- mac-cache
- nag-network
- name-server
- network
- network-access-group
- network-range
- port-monitor
- profile
- radius
- radius-group
- role
- server
- serverid
- server-port
- server-port-map
- server-port-map-range
- snmp
- snmp-access
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user
- user-security
- vcm
- User privileges
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Importing an enclosure
- Setting the domain name
- Configuring local users
- Configuring local users
- Configuring LDAP authentication support for users
- Configuring RADIUS authentication support for users
- Configuring TACACS+ authentication support for users
- Configuring role-based authentication settings
- Obtaining and using a new signed certificate
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Appendix: Using Virtual Connect with nPartitions
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 29 |
| Size: | 540 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 90 |
| Size: | 1.57 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface Version 2.0 User Guide
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- firmware
- igmp
- interconnect
- ldap
- ldap-certificate
- ldap-group
- log-target
- mac-cache
- network
- port-monitor
- profile
- server
- serverid
- server-port
- server-port-map
- snmp
- snmp-trap
- ssh
- ssl-certificate
- ssl-csr
- ssl
- stackinglink
- status
- supportinfo
- systemlog
- uplinkport
- uplinkset
- user
- user-security
- vcm
- version
- Help subsystem
- Output format
- Configuring the Virtual Connect domain using the CLI
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 21 |
| Size: | 609 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 242 |
| Size: | 11.55 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem User Guide
- Notice
- Contents
- Setup
- Component identification
- HP 1/10Gb VC-Enet Module components and LEDs
- HP 1/10Gb-F VC-Enet Module components and LEDs
- HP Virtual Connect Flex-10 10Gb Ethernet Module components and LEDs
- HP 4Gb Fibre Channel Module components and LEDs
- HP Virtual Connect 4Gb FC Module (with enhanced NPIV) components and LEDs
- Resetting the Administrator password and DNS settings
- Warning messages
- Installation
- Supported configurations
- Installation guidelines
- Installing a VC-Enet module
- Installing a VC-FC module
- Factory default settings
- Installing SFP/SFP+/XFP transceivers
- Removing SFP/SFP+/XFP transceivers
- Recommended stacking connections
- Loop prevention
- Connecting Virtual Connect Ethernet module uplinks
- Failover and check-pointing
- HP Virtual Connect Manager
- Configuring browser support
- Virtual Connect and RDP
- Accessing HP Virtual Connect Manager
- Logging on to the HP Virtual Connect Manager GUI
- HP Virtual Connect Home
- About HP Virtual Connect Manager
- Navigating the HP Virtual Connect Manager GUI
- Export support information
- Reset Virtual Connect Manager
- Running the setup wizards
- Verifying data center connections
- Network management
- Networks overview
- Define Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define New Shared Uplink Set screen
- Storage management
- Server management
- Domain management
- Domain overview
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures)
- Domain Settings (Backup/Restore) screen
- Domain Settings (Firmware Management) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP and SMI-S overview
- System Log screen
- System Log Configuration
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Administrative module removal
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Regulatory compliance notices
- Regulatory compliance identification numbers
- Federal Communications Commission notice
- Declaration of conformity for products marked with the FCC logo, United States only
- Modifications
- Cables
- Canadian notice (Avis Canadien)
- European Union regulatory notice
- Disposal of waste equipment by users in private households in the European Union
- Japanese notice
- BSMI notice
- Korean notice
- Chinese notice
- Laser compliance
- Electrostatic discharge
- Technical support
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 220 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 131 |
| Size: | 1.09 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.10/3.15 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- interconnect
- iscsi-boot-param
- iscsi-connection
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- log-target
- mac-cache
- network
- port-monitor
- profile
- server
- serverid
- server-port
- server-port-map
- snmp
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- status
- supportinfo
- systemlog
- uplinkport
- uplinkset
- user
- user-security
- vcm
- version
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Network setup
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number (logical) settings
- Server profile overview
- Creating server profiles
- Adding enet-network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- General requirements for adding FC or FCoE connections
- Assigning a server profile to device bay 1
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Server blade power on and power off guidelines
- Logging out of the CLI
- Common management operations
- Resetting the Virtual Connect Manager
- Basic configuration
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 162 |
| Size: | 1.28 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- version
- banner
- config
- configbackup
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- igmp-group
- interconnect
- interconnect-mac-table
- iscsi-boot-param
- iscsi-connection
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- lldp
- log-target
- loop-protect
- mac-cache
- nag-network
- network
- network-access-group
- network-range
- port-monitor
- profile
- radius
- radius-group
- role
- server
- serverid
- server-port
- server-port-map
- server-port-map-range
- snmp
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user
- user-security
- vcm
- User privileges
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 32 |
| Size: | 497 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 162 |
| Size: | 6.40 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystemVersion 3.01User Guide
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Firmware updates
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures) screen
- Domain Settings (Backup/Restore) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Edit Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define Shared Uplink Set screen
- Shared Uplink Sets (External Connections) screen
- Shared Uplink Sets (Associated Networks) screen
- Storage management
- Server management
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Module removal and replacement
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 308 |
| Size: | 11.82 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 4.10 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Minimum requirements
- LDAP Server Settings (LDAP Server) screen
- LDAP Server Settings (LDAP Groups) screen
- LDAP Server Settings (LDAP Certificate) screen
- RADIUS Settings (RADIUS Server) screen
- RADIUS Settings (RADIUS Groups) screen
- TACACS+ Settings screen
- Role Management (Role Authentication Order) screen
- Role Management (Role Operations) screen
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Network Access Groups screen
- Define Network Access Group screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Networks (Advanced Settings)
- Quality of Service
- IGMP Settings (IGMP Configuration) screen
- IGMP Settings (Multicast Filter Set) screen
- Define Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Creating FCoE HBA connections for a BL890c i4
- Limited Ethernet connections when using HP Virtual Connect Flex-10/10D modules
- Creating iSCSI connections
- iSCSI HBA connections screen
- Define Server Profile screen (multiple enclosures)
- Multiple network connections for a server port
- Defining server VLAN mappings
- Fibre Channel boot parameters
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Define Server Profile screen
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Throughput Statistics screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Ethernet Bay Summary (General Information) screen
- Ethernet Bay Summary (Uplink Port Information) screen
- Ethernet Bay Summary (Server Port Information) screen
- Ethernet Bay Summary (MAC Address Table) screen
- Ethernet Bay Summary (IGMP Multicast Groups) screen
- Ethernet Bay Summary (Name Server) screen
- Ethernet Port Detailed Statistics screen
- FC Port Detailed Statistics screen
- FC Bay Summary screen
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10, HP Virtual Connect FlexFabric, or HP Virtual Connect Flex-10/10D module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Appendix A: Using Virtual Connect with nPartitions
- Appendix B: Auto-deployment process
- Overview of the auto deployment process
- Importing the enclosure into the domain
- Starting a deployment operation
- Viewing deployment information, status, and logs
- Manual TFTP settings
- Stopping a deployment operation
- Subsequent deployments (redeployment scenarios)
- VC GUI auto-deployment status and settings
- Deployment wait and retry states
- Configuring file restrictions
- TFTP logging and enablement
- Appendix C: Using IPv6 with Virtual Connect
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 1.39 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.10 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- activity
- all
- auto-deployment
- banner
- config
- configbackup
- connection-map
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp-group
- igmp
- interconnect-mac-table
- interconnect
- iscsi-boot-param
- iscsi-connection
- lacp-timer
- ldap-certificate
- ldap-group
- ldap
- link-dist-interval
- lldp
- local-users
- log-target
- loop-protect
- mac-cache
- mcast-filter-rule
- mcast-filter-set
- mcast-filter
- mfs-filter
- nag-network
- name-server
- network-access-group
- network-range
- network
- port-monitor
- port-protect
- profile
- qos-class
- qos-classifier
- qos-map
- qos
- radius-group
- radius
- role
- server-port-map-range
- server-port-map
- server-port
- server
- serverid
- session
- snmp-access
- snmp-trap
- snmp
- ssh
- ssl-certificate
- ssl-csr
- ssl
- stackinglink
- statistics-throughput
- statistics
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user-security
- user
- vcm
- version
- User roles
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Importing an enclosure
- Setting the domain name
- Configuring LDAP authentication support for users
- Configuring RADIUS authentication support for users
- Configuring TACACS+ authentication support for users
- Configuring role-based authentication settings
- Configuring local users
- Configuring local users
- Configuring the LACP Timer
- Obtaining and using a new signed certificate
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Configuring pause flood protection settings
- Hiding unused FlexNICs in a profile
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 161 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 95 |
| Size: | 1.64 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface Version 2.30 User Guide
- Notice
- Contents
- Introduction
- Command line
- ldap-certificate
- Help subsystem
- Output format
- Configuring the Virtual Connect domain using the CLI
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 31 |
| Size: | 491 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 950 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 93 |
| Size: | 1.63 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide
- Notice
- Contents
- Introduction
- Command line
- Configuring the Virtual Connect domain using the CLI
- Technical support
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 223 |
| Size: | 14.74 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC module)
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10 module or HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 21 |
| Size: | 502 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 195 |
| Size: | 4.72 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 3.10/3.15 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Firmware updates
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures) screen
- Domain Settings (Backup/Restore) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Edit Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define Shared Uplink Set screen
- Shared Uplink Sets (External Connections) screen
- Shared Uplink Sets (Associated Networks) screen
- Storage management
- Server management
- Server profile overview
- Multi-blade servers
- Flex-10 overview
- Flex-10 configuration
- Port assignment
- FlexFabric overview
- Upgrading or removing an HP Virtual Connect Flex-10 Module or HP Virtual Connect FlexFabric Module
- Upgrading to an HP Virtual Connect FlexFabric Module from a VC-FC module
- iSCSI and FCoE port assignments
- Bandwidth assignment
- PXE settings
- iSCSI offload and boot
- Define Server Profile screen
- Server Profiles screen
- Edit a Server Profile (single profile) screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- View printable report
- Server profile troubleshooting
- Serial Number (Logical) Settings
- General requirements for adding FC or FCoE connections
- Server profile overview
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Special notes on interconnect module removal and replacement
- Special notes on Onboard Administrator removal and replacement
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 162 |
| Size: | 6.40 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystemVersion 3.00User Guidefor HP Integrity BL8x0c i2 Series Server Blades
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Firmware updates
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures) screen
- Domain Settings (Backup/Restore) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Edit Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define Shared Uplink Set screen
- Shared Uplink Sets (External Connections) screen
- Shared Uplink Sets (Associated Networks) screen
- Storage management
- Server management
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Module removal and replacement
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 1.00 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.01 User Guide
- Abstract
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- version
- activity
- banner
- config
- configbackup
- connection-map
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- igmp-group
- interconnect
- interconnect-mac-table
- iscsi-boot-param
- iscsi-connection
- lacp-timer
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- lldp
- local-users
- log-target
- loop-protect
- mac-cache
- mfs-filter
- mcast-filter
- mcast-filter-rule
- mcast-filter-set
- nag-network
- name-server
- network
- network-access-group
- network-range
- port-monitor
- port-protect
- profile
- qos
- qos-class
- qos-classifier
- qos-map
- radius
- radius-group
- role
- server
- serverid
- server-port
- server-port-map
- server-port-map-range
- session
- snmp
- snmp-access
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user
- user-security
- vcm
- User roles
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Importing an enclosure
- Setting the domain name
- Configuring local users
- Configuring local users
- Configuring LDAP authentication support for users
- Configuring RADIUS authentication support for users
- Configuring TACACS+ authentication support for users
- Configuring role-based authentication settings
- Configuring the LACP Timer
- Obtaining and using a new signed certificate
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Configuring pause flood protection settings
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Appendix: Using Virtual Connect with nPartitions
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 159 |
| Size: | 1.28 MB |
Show table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.51/3.60 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- version
- banner
- config
- configbackup
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- igmp-group
- interconnect
- interconnect-mac-table
- iscsi-boot-param
- iscsi-connection
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- lldp
- log-target
- loop-protect
- mac-cache
- nag-network
- network
- network-access-group
- network-range
- port-monitor
- profile
- radius
- radius-group
- role
- server
- serverid
- server-port
- server-port-map
- server-port-map-range
- snmp
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user
- user-security
- vcm
- User privileges
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 230 |
| Size: | 14.72 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 3.51/3.60 User Guide
- Abstract
- Notice
- Contents
- Introduction
- HP Virtual Connect Manager
- Virtual Connect domains
- Understanding Virtual Connect domains
- Managing domains
- Managing SNMP
- Viewing the system log
- Managing SSL configuration
- HP BladeSystem c-Class enclosures
- Virtual Connect users and roles
- Understanding VC administrative roles
- Managing users
- Local Users screen
- Configuring LDAP, RADIUS, and TACACS+
- Virtual Connect networks
- Understanding networks and shared uplink sets
- Managing networks
- Managing shared uplink sets
- Virtual Connect fabrics
- Virtual Connect server profiles
- Understanding server profiles
- Managing MAC, WWN, and server virtual ID settings
- Managing server profiles
- Define Server Profile screen
- Server Profiles screen
- Edit Server Profile screen
- Assigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade
- Unassigning a server profile with FCoE connections to an HP ProLiant BL680c G7 Server Blade and deleting the SAN fabric
- General requirements for adding FC or FCoE connections
- Virtual Connect and Insight Control Server Deployment
- Virtual Connect modules
- Firmware updates
- Stacking Links screen
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC module)
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Port status conditions
- Interconnect module removal and replacement
- Virtual Connect modules
- Upgrading to an HP Virtual Connect 8Gb 24-Port FC Module
- Upgrading to an HP Virtual Connect 8Gb 20-Port FC Module
- Upgrading or removing an HP Virtual Connect Flex-10 module or HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Onboard Administrator modules
- Maintenance and troubleshooting
- Acronyms and abbreviations
- Glossary
- Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 158 |
| Size: | 9.43 MB |
Show table of contents
Document Outline
- HP Virtual Connect for c-Class BladeSystem Version 2.10 User Guide
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures)
- Domain Settings (Backup/Restore) screen
- Domain Settings (Firmware Management) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP and SMI-S overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define New Shared Uplink Set screen
- Storage management
- Server management
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Administrative module removal
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 21 |
| Size: | 483 KB |