HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 22)

Command line 22
Item Description
->show enet-connection Profile1:1
Displays a specific Ethernet connection of profile Profile1
enet-vlan
Manage Ethernet VLAN connections.
Supported actions: help, set, show
Item Description
set enet-vlan Modifiy general Ethernet VLAN configuration settings.
Syntax set enet-vlan VLanTagControl=
[SharedServerVLanId=]
[PrefSpeedType=] [PrefSpeed=]
[MaxSpeedType=] [MaxSpeed=]
Properties
VLanTagControl
(optional)
Determines how Ethernet packet VLAN tags are handled by the domain. Valid
values include: "Tunnel" and "Map".
The "tunnel" option results in VLAN tagging to be supported only on networks
with dedicated uplinks. Also, Ethernet ports connected to networks using shared
uplink sets can only transmit and receive untagged frames.
The "map" option results in being able to add more than one network to a
single Ethernet port for the server profiles and also being able to specify VLAN
mapping between server tags and VC networks. Also, Ethernet networks with
dedicated uplinks can only transmit and receive untagged frames.
SharedServerVLanId
(optional)
Enables or disables the option to force server ports connected to multiple VC
Ethernet networks to use the same VLAN mappings as those used by
corresponding shared uplink sets. Valid values include: "true" and "false".
Setting the value to "true" restricts the server network connections to be selected
from a single shared uplink, and the VLAN ID cannot be modified.
Setting the value to "false" allows the user to select any VC Ethernet network for
the server Ethernet connections, and VLAN ID mappings can be modified to
ensure uniqueness.
SharedServerVLanId can be "true" only if VLanTagControl is set to "Map".
PrefSpeedType
(Optional)
Default connection speed for any Ethernet connection using multiple networks.
Valid values include "Auto" and "Custom". "Custom" allows the user to
configure the preferred speed. The default value is "Auto".
PrefSpeed (Required
if PrefSpeedType is
'Custom')
The default connection speed for any Ethernet connection using multiple
networks. Valid values range from: 100Mb-10Gb in 100Mb increments.
MaxSpeedType
(Optional)
Maximum connection speed for any Ethernet connection using multiple
networks. Valid values include "UnRestricted" and "Custom". "Custom" allows
the user to configure the preferred speed. The default value is "Unrestricted".
MaxSpeed (required
if MaxpeedType is
"Custom")
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values range from: 100Mb-10Gb in 100Mb increments.
Examples