HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 44)

Command line 44
Item Description
Duplex (optional) The port duplex mode of the network analyzer port. Valid values include: "Auto",
"Half", and "Full". The default value is "Auto".
MonitorPort
(required if the
Direction property
is being modified)
The server port to be monitored. The format of the monitored port is:
::.
If the enclosure ID is not specified, the default enclosure is the local enclosure
where the domain resides.
Direction
(optional)
The direction of network traffic on the port being monitored. Valid values include:
"ToServer", "FromServer", and "Both".
Examples
->set port-monitor AnalyzerPort=enc0:3:1 Speed=1Gb
Duplex=half
Modifies network analyzer uplink port properties
->set port-monitor MonitorPort=enc0:1:6 Direction=ToServer
Modifies a monitored server port
->set port-monitor Enabled=true
Enables port monitoring
->set port-monitor Enabled=false
Disables port monitoring
Item Description
show port-monitor Display the Virtual Connect port monitor configuration.
Syntax show port-monitor
Example
->show port-monitor
Displays the port monitor configuration
profile
Manage server profiles.
Supported actions: add, assign, help, remove, set, show, unassign
Item Description
add profile
Create a new server profile. After the profile has been created, the profile can
then be configured using the "set" subcommand and additional network and
fabric connections can also be added. The server profile can also be assigned to
a device bay using the "assign" subcommand.
Syntax add profile [-NoDefaultEnetConn] [-
NoDefaultFcConn] [SNType=
Defined>] [SerialNumber=]
[UUID=]
Parameter
ProfileName The unique name of the new server profile to create
Options