HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 95)

Command line 95
Item Description
->show uplinkport *
Displays all uplink ports in the enclosure (detailed view)
->show uplinkport ID=enc0:1
Displays all the uplink ports for bay 1 of the local enclosure
->show uplinkport status=Linked
Displays all the uplink ports that are linked
->show uplinkport ID=enc0:1 type=RJ45
Displays all the uplink ports for bay 1 of the local enclosure with connector type RJ-45
uplinkset
Manage shared uplink sets.
Supported actions: add, copy, help, remove, set, show
Item Description
add uplinkset Create a new shared uplink set.
Syntax
add uplinkset
[ConnectionMode=]
Parameter
UplinkSetName
(required)
The unique name of the new shared uplink set to create
Property
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
shared uplink set. Valid values include "Auto" and "Failover". The default value is
"Auto".
Examples
->add uplinkset MyNewUplinkSet
Creates a new shared uplink set and adds it to the domain
->add uplinkset MyNewUplinkSet ConnectionMode=Failover
Creates a new shared uplink set and sets the connection mode to Failover
Item Description
copy uplinkset Copy a shared uplink port set.
Syntax
copy uplinkset fromVlanStr=
toVlanStr= [replace=]
Parameters
fromSUS (required) The unique name of the shared uplink set to copy from
toSUS (required) The unique name of the shared uplink set to copy to
Properties
fromVlanStr
(required)
The partial network name string to be replaced. The fromVlanStr property cannot
be empty and must be existing in all associated network names.
toVlanStr (required) The network name string to be replaced to. The new network name cannot exceed
64 characters. This string can be empty, which is considered as removing
fromVlanStr from all associated network names.
replace (optional) The instance of the string replacement to occur. Valid values include "all", "first",
and "last". The default value is "all".
Example
->copy uplinkset uplinkset_1 uplinkset_2 fromVlanStr=LEFT
toVlanStr=RIGHT replace=first