HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 13)

Command line 13
Managed element Description
firmware (on page 29 ) Manage interconnect module firmware
igmp (on page 30 ) Manage Ethernet IGMP Snooping settings
interconnect (on page 31 ) Manage I/O interconnect modules
ldap (on page 32 ) Manage LDAP configuration settings
ldap-certificate (on page 33 ) Manage LDAP certificate information
ldap-group (on page 34 ) Manage LDAP group configuration settings
log-target (on page 35 ) Manage remote log destination settings
mac-cache (on page 37 ) Manage Ethernet MAC cache failover settings
network (on page 38 ) Manage Virtual Connect Ethernet networks
port-monitor (on page 42 ) Monitor port monitor configurations
profile (on page 44 ) Manage Virtual Connect server profiles
server (on page 47 ) Manage physical HP BladeSystem servers
serverid (on page 49 ) Manage virtual server ID configuration settings
server-port (on page 50 ) Display all physical server ports
server-port-map (on page 51 ) Manage shared server downlink port mapping configuration
snmp (on page 53 ) Modify SNMP configurations
snmp-trap (on page 54 ) Modify SNMP-trap configurations
ssh (on page 56 ) Display SSL configuration and information
ssl-certificate (on page 57 ) Manage SSL certificate information
ssl-csr (on page 57 ) Manage an SSL certificate signing request
Manage weak SSL encryption
stackinglink (on page 59 ) Display stacking link information and status
status (on page 59 ) Display overall Virtual Connect domain status information
supportinfo (on page 59 ) Manage Virtual Connect support information
systemlog (on page 59 ) Display Virtual Connect Manager system event log
uplinkport (on page 60 ) Manage interconnect module uplink ports
uplinkset (on page 62 ) Manage shared uplink port sets
user (on page 64 ) Manage local Virtual Connect user configurations
user-security (on page 66 ) Manage user security settings
vcm (on page 67 ) Manage the Virtual Connect domain manager
version (on page 67 ) Display CLI version information
The following sections provide detailed information on how the subcommands are used with each
managed element.
To display command help, type a command followed by ? or -help. For additional information on the
help subcommand, see "Help subsystem (on page 67 )."
all
Manage all Virtual Connect domain elements.
ssl (on page 58 )