HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 52)

Command line 52
Item Description
Type (required) The type of the virtual serial number source. When server profiles are created,
the virtual serial numbers and UUID values are allocated from the specified pool
source.
Valid values include "Factory-Defined" (default), "VC-Defined", and "User-
Defined".
PoolID (optional) The VC-Defined Pool ID to be used. If not specified, the default Pool ID is 1. This
property is only valid for VC-Defined-serial number types.
Start (required if
Type is User-
Defined)
The starting serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start
with the pattern VCX01.
End (required if
Type is User-
Defined)
The ending serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start
with the pattern VCX01.
Examples
->set serverid Type=Factory-Default
Modifies virtual server ID settings to use factory default serial numbers
->set serverid Type=VC-Defined PoolId=5
Modifies virtual server ID settings to use VC-Defined serial numbers
->set serverid Type=User-Defined Start=VCX0000001
End=VCX0100010
Modifies virtual server ID settings to use a custom, User-Defined serial number
range
Item Description
show serverid Display virtual server ID configuration properties.
Syntax show serverid
Example
->show serverid
Displays virtual server ID configuration properties
server-port
Display the physical server ports.
Supported actions: help, show
Item Description
show server-port Display physical port information.
Syntax show server-port
Parameter
PortID (Optional) The reference of a port mapping ID. The PortID format is
EnclosureID:IOBay:Port. The Port ID can be referenced from the ID column
in the summary display. The detailed display shows any Flex NICs that might be
associated with a server port.
Examples