HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
->show profile
Displays a summary listing of all server profiles
->show profile *
Displays detailed information for all profiles
->show profile MyProfile
Displays detailed information for a specific profile including if a profile is
configured for SAN Boot
Item Description
unassign profile
Unassign a server profile from a device bay
Syntax unassign profile
Parameter
ProfileName
(required)
The name of a server profile that is currently assigned to a device bay
Example ->unassign profile MyProfile1
Unassigns a server profile from a device bay
server
Manage server blades.
Supported actions: help, poweroff, poweron, reboot, show
Item Description
poweroff server Power off one or more physical servers.
Syntax poweroff server [ | *] [-Force |
-ForceOnTimeout] [-timeout=]
Parameter
ServerID (required) The reference ID of a physical server in the domain. The format of the server ID is
If the Enclosure ID is not provided, then the primary or local enclosure is used by
default. "*" powers off all servers in the domain.
Options
Force Forces a power off operation without waiting for the OS to shutdown gracefully.
This option should be used as a last resort, because it can cause potential data
loss on the server.
ForceOnTimeout Attempts a graceful power down, but if the server does not shutdown within the
timeout period (default is 60 seconds), then the server is forced to power off.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete
(per server). The default timeout is 60 seconds.
Examples
->poweroff server enc0:2
Shuts down a specific server in device bay 2 of an enclosure with ID enc0
->poweroff server enc0:2 -Force
Forces a power off operation on a specific server (primary/local enclosure)