HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 66)

Command line 66
Item Description
->set uplinkport enc0:2:4 UplinkSet=MyUplinkSet
Speed=Disabled
Disables a specific port that belongs to a shared uplink set
->set uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Modifies a network uplink port with the connection mode set as "Failover" to take
the primary port role
Item Description
show uplinkport Display all Ethernet module uplink ports known to the domain. If the port is a
member of a network or a shared uplink port set, then it is displayed also.
Syntax show uplinkport [FilterBy]
Parameters
PortID (optional) The ID of an uplink port. The PortID format is
::. "*" displays a detailed view of all
uplink ports.
FilterBy
(optional)
Filter the output of the show command by the specified attribute. The option is
specified in the format =. For example, to display uplink
ports belonging to enclosure enc0, the option would be specified as ID=enc0. To
display all the ports using connector type RJ-45, the option would be Type=RJ45.
You can specify more than one filter option for a single command; for example,
show uplinkport ID=enc0 Type=RJ45.
Example
->show uplinkport
Displays all uplink ports
->show uplinkport enc0:5:6
Displays details of uplink port 6 in bay 5 of the local enclosure
->show uplinkport *
Displays all uplink ports in the enclosure (detailed view)
->show uplinkport ID=enc0:1
Displays all the uplink ports for the specific bay (for example, for bay 1)
->show uplinkport status=Linked
Displays all the uplink ports that are linked
->show uplinkport ID=enc0:1 type=RJ45
Displays all the uplink ports for the specific bay 1 with connector type RJ-45
uplinkset
Manage shared uplink port sets
Supported actions: add, help, remove, set, show
Item Description
add uplinkset Create a new shared uplink port set.
Syntax add uplinkset
[ConnectionMode=]