HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 62)

Command line 62
Item Description
show serverid Display virtual server ID configuration properties.
Syntax
show serverid
Example
->show serverid
Displays virtual server ID configuration properties
server-port
Display the physical server ports.
Supported actions: help, show
Item Description
show server-port Display physical server port information.
Syntax
show server-port []
Parameter
PortID (Optional) The reference of a port mapping ID. The PortID format is
EnclosureID:IOBay:Port. The Port ID can be referenced from the ID column in
the summary display. The detailed display shows any Flex NICs that might be
associated with a server port.
Examples
->show server-port
Displays a summary listing of all physical server ports
->show server-port *
Displays detailed information for all physical server ports
->show server-port enc0:3:d2
Displays detailed information for a specific server port
->show server-port enc0:1:d4
Displays detailed information for the Device Control Channel
server-port-map
Manage shared server downlink port mapping configuration
Supported actions: add, help, remove, set, show
Item Description
add server-port-map Add a new server port network mapping, and allow server ports to be shared
among multiple VC Ethernet networks.
This command cannot be used if the domain setting VLanTagControl is currently set
to "Tunnel".
Syntax
add server-port-map
[Uplinkset=] [VLanID=]
[Untagged=]
Parameters
ConnectionID
(required)
The reference ID of an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is .
Network (required) The name of a valid network to which the mapping will be added. A network can