HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 56
Command line 56
Item Description
Type (optional)
This parameter indicates the type of VC modules for which to display SNMP trap
information. The default behavior is to display all SNMP trap information if a
specific type is not specified. Valid types include "Enet:
" and"FC:
", where "Address" can be a specific IP address or "*".Examples
->show snmp-trap
Displays SNMP trap information for all VC modules
->show snmp-trap Enet:*
Displays SNMP trap information for only VC-Enet modules
->show snmp-trap Fc:*
Displays SNMP trap information for only VC-FC modules
->show snmp-trap Enet:10.20.30.40
Displays SNMP trap information for specific VC-Enet modules
ssh
Display the SSH key configuration.
Supported actions: help, load, remove, show
Item Description
load ssh
Transfer the SSH key from a remote FTP server and apply it to the Virtual Connect
domain. A customized SSH key enables additional security for SSH clients that are
allowed to access the domain configuration. If a new custom SSH key is applied,
then the SSH clients must be configured correctly to have access.
Syntax
load ssh Address=
FileName=
Properties
Address
(required)
The IP address or host name of an FTP server, with username and password
FileName
(optional)
The name of the remote file containing the SSH key to transfer
Example
->load ssh Address=ftp://user:[email protected]
FileName=/ssh_key.pub
Transfers the SSH key from the remote FTP server
Item Description
remove ssh
Remove any custom SSH keys that have been applied.
Syntax
remove ssh
Example
->remove ssh
Removes SSH keys