HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 54)

Command line 54
Item Description
Properties
ReadCommunity
(optional)
Read-Only Community String for SNMP. The default value is "Public" if not
specified.
SystemContact SNMP system contact information
Enabled (optional) Enables or disables the SNMP agent. The default value is "true". Valid values
include "true" or "false".
SmisEnabled
(optional)
This property is valid only for FC modules. The default value is "false". Valid
values include "true" or "false".
Examples
->set snmp Enet ReadCommunity=datacentre1
[email protected] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp FC ReadCommunity=datacentre2
[email protected] Enabled=true
Enables the SNMP agent for VC-FC modules
->set snmp FC Enabled=false
Disables the SNMP agent for VC-FC modules
Item Description
show snmp Display the SNMP configuration settings for the VC domain.
Syntax show snmp
Parameter
Type (optional) Indicates the type of VC module to display SNMP configuration for. If the type is
not specified, all VC module SNMP configuration information is displayed. Valid
values include: "Enet" and "FC".
Examples
->show snmp Enet
Displays SNMP configuration for only VC-Enet modules
->show snmp FC
Displays SNMP configuration for only VC-FC modules
->show snmp
Displays SNMP configuration for all VC modules
snmp-trap
Displays SNMP trap information
Supported actions: add, remove, set, show
Item Description
snmp-trap Add a new SNMP trap destination for VC-Enet and VC-FC interconnect modules.
Syntax add snmp-trap [Community=]
Parameter