HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 55)

Command line 55
Item Description
Examples
->remove nag-network DatabaseNetGroup:Net1
-or-
->remove nag-network Nag=DatabaseNetGroup Network=Net1
Removes a specified network from a specified network access group
->remove nag-network Nag=DatabaseNetGroup Network=Net1,Net2
Removes specified networks from a specified network access group
Item Description
show nag-network Display the network to network access group association information.
Syntax
show nag-network [|*]
Parameter
NagNetworkID
(optional)
The ID of an existing network to network access group association. The ID format is
. Use "*" to display detailed information for all network
to network access group associations in the domain. If not specified, a summary of all
network to network access group associations appears.
Examples
->show nag-network
Displays a summary of all network to network access group associations in the domain
->show nag-network *
Displays detailed information for all network to network access group associations in
the domain
->show nag-network DatabaseNetGroup:Net1
Displays detailed information about the association between a specified network
access group and a specified network
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network Create a new Ethernet network. After the network is created, uplink ports can be added
if the network is not using a shared uplink set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it is ignored. To configure the SmartLink attribute, use the set network
command.
Syntax
add network [-quiet]
[Nags=[,,...]] [UplinkSet=
VLanID=] [State=]
[NativeVLAN=] [Private=]
[ConnectionMode=]
[VLanTunnel=] [PrefSpeedType=]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The unique name of the new network to create. Valid characters include alphanumeric,
"_", and ".". The maximum length of the name is 64 characters.
Option
Quiet Suppresses user confirmation prompts during network creation and modification. This