HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 87)

Command line 87
Item Description
(required)
Example
->unassign profile MyProfile1
Unassigns a server profile from a device bay
qos-class
Manage the class of the active QoS configuration.
Supported actions: help, set, show
Item Description
set qos-class Modify a class of the active QoS configuration
Syntax
set qos-class
[Name=NewClassName][Enabled=]
[RealTime=] [Share=<1-99>] [MaxShare=<1-100>]
[EgressDOT1P=<1,2,3,4,5,6,7>]
Parameter
ClassName (required) The name of an existing traffic class
Properties
Name (optional) The new name of the class. The name can be 1-64 characters in length, with
alphanumeric and "_", ".", "-". The names of the system classes, Best_Effort, and
FCoE_Lossless cannot be modified.
Enabled (optional) Enables or disables the class. Valid values are "True" and "False". If the class
becomes disabled, the share is given to the Best_Effort class. An enabled class
cannot be disabled if it is currently used by an active classification map. A system
class cannot be disabled.
RealTime (optional) Sets the class to be real time. Valid values are "True" and "False". A real time class
gets strict priority queuing and no latency. Only one real time class is allowed. The
RealTime property of a system class cannot be modified.
Share (optional) Minimum guaranteed bandwidth percentage the traffic class gets. Valid values are
1-99. This value cannot be modified for system classes. The FCoE_Lossless class
gets its share from the profile connection configuration. The total share of all
enabled classes, excluding the FCoE_Lossless class, is 100. When the share of an
enabled class is modified, the share of the Best_Effort class is adjusted to maintain
100% among all enabled classes. An error is returned if the share modification
causes the Best_Effort class to have no share. The Share and MaxShare
properties of the real time class are set to the same value. When the Share value
is modified, the MaxShare is updated automatically, and vice versa. The maximum
Share and MaxShare value for a real time class is 50.
MaxShare (optional) The maximum share the traffic class can use when other traffic classes are not using
their shares. The valid values are 1-100. This value cannot be modified for a system
class, except for the Best_Effort class. The MaxShare value should be greater than
or equal to the Share value.
EgressDOT1P
(optional)
Traffic classified in a particular class egresses with the specified DOT1P priority
marking on the VLAN tag. Valid values are 1-7. The EgressDOT1P value must be
unique among the enabled classes. System classes have predefined egress DOT1P
priority values: 3 for the FCoE_Lossless class and 0 for the Best_Effort class. This
value cannot be modified for system classes.
Examples
->set qos-class Blue Name=Green
Renames a class