HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 49)

Command line 49
iscsi-boot-param
Manage iSCSI boot parameters within a domain.
Supported actions: help, remove, set, show
Item Description
remove
iscsi-boot-param
Remove all iSCSI boot parameters configured on the specified iSCSI
connection.
Syntax
remove iscsi-boot-param
Parameter
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is . To
retrieve the port number of the iSCSI connection, use the show profile
command.
Example
->remove iscsi-boot-param MyProfile1:1
Removes boot parameters configured on connection 1 of MyProfile1
Item Description
set iscsi-boot-param Configure the basic iSCSI boot parameters on the specified iSCSI connection.
Syntax
set iscsi-boot-param [-maskSecret]
[-maskMutualSecret]
[BootOrder=]
[LUN=] [InitiatorName=
name>] [InitiatorIP=] [Mask=]
[Gateway=] [VlanID=]
[TargetName=] [TargetIP=]
[TargetPort=] [TargetIP2=
Target IP>] [TargetPort2=]
[Authentication=] [Username=]
[Secret=] [MutualUsername=]
[MutualSecret=]
[iSCSIBootParamDHCP=]
[NetworkParamDHCP=]
[DHCPVendorID=]
Parameter
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is . To
retrieve the port number of the iSCSI connection, use the show profile
command.
Options
maskSecret (optional) Enables you to interactively specify the CHAP secret password as a masked
string at the command prompt.
maskMutualSecret
(optional)
Enables you to interactively specify the mutual CHAP secret password as a
masked string at the prompt.
Properties
BootOrder (optional) Enables or disables iSCSI boot. Valid values for enabling iSCSI boot include
"Primary", "Secondary", or "USE-BIOS". The default value is "Disabled".
LUN (optional) The LUN of the target, which identifies the volume to be accessed. Valid values
for standard LUNs are 0 to 255 decimal values. Valid values for extended LUNs
are 13- to 16-character hexadecimal values. The default value is 0.