Removing sfp/sfp+/xfp transceivers – HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 42
Installation 42
Ensure that the latch is closed and that the transceiver is fully seated.
3.
Do one of the following:
o
Connect the appropriate cable.
o
Install the dust plug onto the transceiver.
Removing SFP/SFP+/XFP transceivers
WARNING:
To avoid serious injury, never look directly into an open transceiver port.
CAUTION:
Disconnect all cables before removing or installing an SFP/SFP+/XFP transceiver,
because of the potential damage to the cables, the cable connector, or the optical interfaces in
the transceiver.
Removing and installing a transceiver can shorten the useful life. Do not remove and insert
transceivers more often than is necessary.
1.
Disconnect all cables.
2.
Open the latch.
This manual is related to the following products: