HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 57)

Command line 57
Item Description
Parameter
TrapID (required) (Required) The reference name of the trap destination to be modified. The format
of the trap ID is :
the trap destination host.
Property
Community
(optional)
The SNMP community name string for the trap. For ENET modules, maximum
string length is 39. For FC modules, maximum string length is 24. The default
community name is "public", if not specified.
Example
->set snmp-trap ENET:192.135.67.89
Community=MyNewCommunityName
Modifies an SNMP trap destination for VC-Enet modules
Item Description
->show snmp-trap Display the SNMP Traps that have been configured.
Syntax show snmp-trap [ | * ]
Parameter
Type (optional) This parameter indicates the type of VC modules for which to display SNMP trap
information. The default behavior is to display all SNMP trap information if a
specific type is not specified. Valid types include "Enet:
"FC:
Examples
->show snmp-trap
Displays SNMP trap information for all VC modules
->show snmp-trap Enet:*
Displays SNMP trap information for only VC-Enet modules
->show snmp-trap Fc:*
Displays SNMP trap information for only VC-FC modules
->show snmp-trap Enet:10.20.30.40
Displays SNMP trap information for specific VC-Enet modules
ssh
Display the SSH key configuration.
Supported actions: help, load, remove, show
Item Description
load ssh Transfer the SSH key from a remote FTP server and apply it to the Virtual Connect
domain. A customized SSH key enables additional security for SSH clients that are
allowed to access the domain configuration. If a new custom SSH key is applied,
then the SSH clients must be configured correctly to have access.
Syntax load ssh Address=
FileName=
Properties