HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 17)

Command line 17
Item Description
->set domain WwnType=User-Defined
WwnStart=50:06:0B:00:00:C2:62:00
WwnEnd=50:06:0B:00:00:C2:62:FF
Sets the WWN address source to a custom, user-defined address range
->set domain SingleDense=true
Sets the display option to support single-dense server blades in a double-dense
supported configuration
Item Description
show domain Display general Virtual Connect domain information, including the Virtual
Connect domain name, the VCM domain IP address settings, and MAC/WWN
address settings for the domain.
Syntax show domain [addressPool]
Parameter
addressPool
(Optional)
Displays all the VC-defined address pool range available for use
Examples
->show domain
Displays domain information
->show domain addressPool
Displays the VC-defined address pools for the domain
enclosure
Manage general enclosure settings and information.
Supported actions: help, import, remove, show
Item Description
import enclosure Import local and remote enclosures into the Virtual Connect domain.
Syntax import enclosure UserName= Password=
[DoubleDense=]
The password field is optional on the command line. If not specified on the
command line, the user is prompted for the same interactively.
Properties
UserName (Required) A valid username of the Onboard Administrator user
Password (Required) A valid password of the Onboard Administrator user to be used for importing
the enclosure. If no password is given at the command-line, the password is
prompted for interactively during the import operation.
DoubleDense
(Optional)
If the enclosure being imported supports double-density servers, then this
property enables the device bay display format to support a display for
double-dense servers. The default behavior is display for single-dense servers in
the enclosure.
Examples
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure