HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 60)

HP Virtual Connect Manager 60
Domain Status screen
This screen provides an overall domain status and a detailed summary of systems that currently have an
alert status other than OK. To view detailed information about a device, click that device name in the list.
Additional information on the issue might be available as a tooltip for the severity icon. To see this
information, mouse over the severity icon.
For information on specific status error messages, see "Status error messages (on page
60 )."
Status error messages
There may be instances where modules with different versions of firmware are running in the same
domain. For example, the installation of a new module either to replace a failed module or to add
additional connections. This situation can result in an error message.
VCM_OP_STATE_FW_INCOMPATIBLE_FAILOVER_CRITICAL
Possible cause: The management application running on the active VC-Enet module has a database that is
not compatible with the management application running on the backup VC-Enet module.
Action: Immediately upgrade the firmware on the backup module to the same level as the active module.
You can also downgrade the firmware on the active module, but this action results in a loss of
configuration data. If you have a backup of the configuration that is compatible, you can recover the data
by restoring from the saved configuration file.
VCM_OP_STATE_FW_INCOMPATIBLE_FAILOVER_MAJOR