HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 86)

Command line 86
Item Description
network access group is not changed.
Examples
->set profile MyProfile Name=MyNewProfileName
Changes the name of a server profile
->set profile Profile1 EFIState=absent
Removes EFI partition block information from a profile
->set profile Profile1 Nag=NetGroup1
Changes the profile's network access group to NetGroup1
Item Description
show profile Display all server profiles that exist in the domain and a summary of the associated
Ethernet, iSCSI, FC, and FCoE connections. To view detailed information for the
connections, use the show enet-connection, show iscsi-connection,
show fc-connection, and show fcoe-connection commands.
Syntax
show profile [|*]
Parameter
ProfileName
(optional)
The name of an existing profile in the VC domain. Use "*" to display all existing
profiles. If not specified, a summary of all profiles appears.
Examples
->show profile
Displays a summary of all server profiles
->show profile *
Displays detailed information for all profiles
->show profile MyProfile
Displays detailed information for a specific profile
Item Description
unassign profile Unassign a server profile from a device bay.
Syntax
unassign profile
Parameter
ProfileName
(required)
The name of a server profile that is currently assigned to a device bay
Example
->unassign profile MyProfile1
Unassigns a server profile from a device bay
qos
Manage the quality of service configurations.
Supported actions: help, reset, set, show
Item Description
reset qos Reset the currently active and saved QoS configuration to the default configuration.
You are prompted for confirmation unless you specify the quiet option.
Syntax
reset qos [-active | | *] [-quiet]
Parameter
Type (required if
Active is not
specified)
Resets the classes, maps, and classifiers for the specified Qos configuration type.
The supported types are "Passthrough", "CustomWithFCoE", or "CustomNoFCoE".
If '*' is specified, then all three QoS configurations are reset to the factory default
settings, and the QoS configuration type is set to "Passthrough".