HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 172)

Domain management 172
TIP: Click on the firmware description link to view release notes for this version.
3. Update the firmware using one of the following methods:
o Click Automated Update.
o Click Update in the row of each module to be updated. The screen displays the progress of the
file being transferred and installed.
When complete, the Update button is replaced with an Activate button. Click Activate to
complete the firmware update. The module is rebooted and brought on line. Network traffic can
be affected during the activation step because that module is unavailable.
IMPORTANT: The active module cannot be activated until the Standby VCM is activated. The
Activate button is disabled for the currently active module until the Standby VCM is successfully
activated. When the process is complete, the active module can be activated. The Active VCM
will transition to the standby before the activation process is started on the active module.
Domain Settings (Local Users) screen
The first time this page appears, the only local user account is the Administrator account, which has
domain privileges. The Administrator account cannot be deleted or have domain privileges removed. The
Administrator password can be changed. The default Administrator password is identified on the Default
Network Settings label on the VC-Enet module in bay 1 of the enclosure. To reset the Administrator
password to the factory default, see "Resetting the Administrator password and DNS settings (on page
28 )."