HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 23)

Command line 23
Item Description
show config Generate a configuration script from the running domain.
Syntax
show config
Example
->show config
Displays the configuration script for the running domain
configbackup
Manage the domain configuration file.
Supported actions: help, restore, save
CAUTION: Do not restore a configuration backup file by using a file from another domain and
including the property to ignore the enclosure serial number. Restoring a Virtual Connect domain
configuration from a backup file that was created on another Virtual Connect domain is not
supported and can cause serious faults within this and other Virtual Connect Domains within the
environment. The restore selection and configuration files should only be used to restore the same
previously existing domain.
Item Description
restore configbackup Transfer a configuration file from a remote TFTP or FTP server and restore the
configuration. Be sure that the domain state is IMPORTED before attempting to
restore the configuration.
Syntax
restore configbackup [-quiet][-maskEncryptKey]
address=
ftp://user:password@ipaddress/[filename]>
[encryptionkey=]
[ignoreenclosureid=]
[ignorefwversion=]
Option
quiet (optional) Suppresses user confirmation prompts
maskEncryptKey
(optional)
Enables you to interactively specify the encryption key as a masked string at the
command prompt
Properties
Address (required) A valid IP address of a TFTP or FTP server with user name and password (where
needed) and the name of the configuration backup file. If not specified, the
default file name is "vc-config-backup". The file path specified is treated as
relative to the login directory for the user on the FTP server. Be sure that the
permissions are appropriate for a successful transfer.
EncryptionKey
(optional)
A password used to encrypt the configuration backup file
IgnoreEnclosureID
(optional)
Restores a configuration that was generated on another enclosure. Valid values
are "true" and "false". The default value is "false". When the value is set to
"false", the configuration generated on another enclosure is rejected.
IgnoreFWVersion
(optional)
Restores a configuration that was generated on another firmware version. Valid
values are "true" and "false". The default value is "false". When the value is set
to "false", the configuration generated on another firmware version is rejected.
Example
->restore configbackup
address=tftp://192.168.10.12/