HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 71)

Command line 71
Item Description
show user-security Display general domain user security settings.
Syntax
show user-security
Example
->show user-security
Displays strong user password settings
vcm
Reset the Virtual Connect Manager.
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the standby VCM may
also be specified (optional), if there is a standby VCM available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity
with the Virtual Connect Manager. If failover is specified and there is a
standby VCM, users are logged off and must reconnect using the standby
VCM IP address.
Syntax reset vcm [-failover]
Option
Failover Forces a failover from the current primary Virtual Connect Manager to the
standby manager
Examples
->reset vcm
Resets the Virtual Connect Manager
->reset vcm -failover
Resets the Virtual Connect Manager and forces a failover to the standby
VCM (if available)
version
Display CLI version information.
Supported actions: help, show
Item Description
show version Display CLI version information.
Syntax show version
Example ->show version
Displays CLI version and copyright information
Help subsystem
The help subsystem consists of three options: