HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 73)

Command line 73
Item Description
->show role *
Displays the authentication order for all user roles
server
Manage server blades.
Supported actions: help, poweroff, poweron, reboot, show
Item Description
poweroff server Power off one or more physical servers.
Syntax
poweroff server [-Force|-ForceOnTimeout]
[-timeout=]
Parameter
ServerID (required) The ID of a physical server in the domain. The format of the server ID is
. If the EnclosureID is not specified, the local
enclosure is used by default. Use "*" to power off all servers in the domain. For a
multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Options
Force Forces a power off operation without waiting for the operating system to shut down
gracefully. Only use this option as a last resort, because it can cause potential data
loss on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (60 seconds by default), the server is forced to power off.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete (per
server). The default timeout is 60 seconds.
Examples
->poweroff server enc0:2
Powers off the server in device bay 2 of the local enclosure
->poweroff server enc0:2 -Force
Forces the server in device bay 2 of the local enclosure to power off
->poweroff server *
Powers off all servers in the domain
->poweroff server enc0:*
Powers off all servers in the local enclosure
->poweroff server enc0:2 -ForceOnTimeout
Attempts a graceful shutdown, but forces a shutdown at the end of the timeout
period
->poweroff server * -Timeout=180
Powers off all servers and specifies a custom timeout of 3 minutes
->poweroff server enc0:1
Powers off the multi-blade server in bays 1-4 of the local enclosure
Item Description
poweron server Power on one or more physical servers.
Syntax
poweron server [-Timeout=]
Parameter
ServerID (required) The ID of a server in the domain. The format of the server ID is
. If the EnclosureID is not specified, the local