Appendix a references, Appendix f references – Retrotec USACE User Manual

Page 458

REF4 ENERGY & PROCESS ASSESSMENT PROTOCOL

Zhivov, Alexander M., Mike C.J. Lin, Alfred Woody, William M. Worek, Michael J. Chimack, &

Robert A. Miller. (September 2006). ERDC/CERL TR-06-25. Energy and Process Optimi-
zation and Benchmarking of Army Industrial Processes. Champaign, IL: ERDC-CERL. Ac-
cessible through www.cecer.army.mil/techreports/erdc-cerl_tr-06-25/erdc-cerl_tr-06-25.pdf.

Appendix A References

Annex 46 Protocol: IEA ECBCS Annex 46, Subtask A. (2009, May). Energy and process assess-

ment protocol for buildings and building sites. United States of America: IEA ECBCS.

Estimation of greenhouse gas emissions reduction in PWGSC building facilities. (2000). Tech-

nical Report prepared by Marbek Resource Consultants for Public Works and Govern-
ment Services Canada: Technology Directorate. Ottawa, Canada.

Facility Energy Decision System (FEDS) Richland: Pacifi c Northwest National Laboratory

Release 6.0, September 2008.

Modelling a nation of buildings: Estimating energy effi ciency potential for large building sam-

ples. (2002). D. Shipley, G. Todesco, & M. Adelaar.

Natural Resources Canada. (2002, December). Offi ce of Energy Effi ciency. Retrieved June 26,

2009, from Commercial and Institutional Building Energy Use Survey 2000 (CIBEUS)
Detailed Statistical Report: http://oee.nrcan.gc.ca/corporate/statistics/neud/dpa/data_e/
Cibeus/Contents.cfm?attr=0.

A screening methodology for implementing cost effective energy retrofi t measures in Canadian

offi ce buildings. (2009). S. E. Chidiac, E. J. C. Catania, E. Morofsky, & S. Foo, in prepa-
ration for publication in Energy & Buildings.

Timeline: Recapitalization and capital renewal: What’s the number? The problem of planning

Appendix F References

Anis, W. (2001). “The impact of airtightness on system design,” ASHRAE Journal Vol. 43, No. 12.
ASHRAE. (2005). Handbook of Fundamentals. American Society of Heating, Refrigerating

and Air-Conditioning Engineers, Inc.

ASHRAE. (2007). “Energy standard for buildings except low-rise residential buildings,”

ASHRAE Standard 90.1. American Society of Heating, Refrigerating and Air-Condi-
tioning Engineers, Inc.

ASTM. (1999). E 779-99, Standard Test Method for Determining Air Leakage Rate by Fan

Pressurization. American Society for Testing and Materials.

Canada Mortgage and Housing Corporation. (2002). “Monitored performance of an innova-

tive multi-unit residential building.” Canada Mortgage and Housing Corporation Re-
search Highlight.

CGSB. (1996). CAN/CGSB-149.15-96, “Determination of the overall envelope airtightness of

buildings by the fan depressurization method using the building’s air handling systems.”
Canadian General Standards Board.

CIBSE. (2000). Technical Memoranda TM23:2000, “Testing buildings for air leakage.” Char-

tered Institution of Building Services Engineers.

Deru, M., & K. Benne, “Barracks energy conservation measure: Building airtightness.” NREL

(March 2008).

Deru, M., & K. Benne, “Barracks energy conservation measure: Building airtightness—inter-

national locations.” NREL (June 2008).