Retrotec USACE - Manual (Page 128)

C2 ENERGY PROCESS ASESSMENT PROTOCOL
3 GENERAL INFORMATION
3.1 Facility
3.2 Name
3.3 Address
3.4 Buildings
3.5
Construction Year and Renovation or Extension Year(s)
3.6 Building Type
3.7 Volume and Area
3.8 Production Structure, Volume of Production and Personnel
Detailed description of the production processes, volume of pro-
duction and personnel of the audited facility.
3.9 Utilities and Connections to Networks
Description of the heating/electricity/water/compressed air utilities
available.
3.10 Operation and Maintenance
Description of operation/maintenance organizations, consumption
monitoring, and maintenance contracts.
4 ENERGY AND WATER CONSUMPTION AND COSTS
Total consumption, consumption by energy types, specifi c consumption
and changes in consumption and costs during the last years. Important
changes in factors such as production structure, volume of production or
number of personnel (which have a signifi cant effect on energy consump-
tion) should also be described.
4.1
Energy and Water Supply
Detailed description of energy and water supply to the building
and to manufacturing processes.
4.2 Total Consumption and Costs
Numerical and graphical presentation, as well as historical data, if
available.
4.3 Heating
4.4 Electricity
4.5 Water
4.6
Other Utilities’ Consumption and Costs
4.7 Shares of Different Energies Used
Shares of all different energy types used shall be presented numeri-
cally. All technical systems/equipment with an energy consumption
share of more than 5% shall be presented separately. The values
can be based either on measurements or on calculations.
4.8 Energy Balance
All primary and secondary energy fl ows shall be presented graphi-
cally (Sankey diagram or similar) and numerically. Balances for
subprocesses/process equipment/production lines can also be pre-
sented in section 7.
4.9 Heating
4.10 Electricity
Consumption